How To Resolve Canon Printer Error 6a00?

BySmith Victor  Last updated on
Canon printer error 6a00

Canon printer is the best printer and is known for printing feasibly compared to other brands. It allows the user to print photos and documents and the scanning and copying of documents and images smoothly.

It also promotes text and graphics from a computer and transfers the information to paper. But sometimes it fails to perform its function correctly and leads to several errors one of them is Canon printer error 6a00.

Do not get upset when this error is displayed on your printer screen, this Canon printer error 6a00 is fixable. You can fix printer offline errors manually in just a few minutes. Users may face this Canon printer error code 6a00 while using the Canon printer.

There are several reasons that can cause this error for example obstruction on the cartridge, dust, ink, or paper building up inside the printer, or the cartridge carriage being unable to return to its position.

This error is displayed on the LCD screen of the printer when the printing component fails to print.

Methods to rectify this Canon Printer Error 6a00

Suffering from Canon printer error 6a00 and looking for a solution to fix this error. This error is remediable and you can fix it manually just follow the below methods to resolve the Canon printer error.

1. Paper output slot

To fix the Canon printer error check your paper output slot. If the paper is stuck inside the printer then this can also cause the error. Follow the below steps to clear the paper output slot.

  • Turn your printer off and take out all the papers from ASF.
  • Then gently pull the jammed paper out, if the paper is visible from the ASF or paper output slot then with help of your hands take the paper out.
  • If the paper gets torn inside the printer then open the printer cover and remove the torn piece of paper inside the printer.
  • After that turn the printer on and make sure that the alarm light is off. If the jammed paper remains inside the printer then it might be automatically ejected.
  • And then reload the paper into the ASF and click ok to clear the error and continue printing. If you are printing through a software application then follow the on-screen instruction.

2. Paper jam inside the printer

If there is any small piece of paper stuck in the printer then it could lead to a Canon printer error. So, in order to resolve this go through the below steps.

  • Turn the printer off and take out the power cord and USB cable.
  • To check if the paper is jammed or not open the rear cover of the printer.
  • Then pull the cassette out and see if the paper is jammed in the cassette area.
  • After that Stand the printer from the rear side down and hold the document cover.
  • And then press the tabs together and pull the green cover toward you and check if the paper is jammed.
  • At the end close the green cover and put the printer back in normal position.

3. Clean the printer

If the dust is building up in the printer then you will suffer from the Canon printer error code 6a00. These steps will help you in removing dirt from the printer.

  • From the printer unplug the power cable feeder and put the printer front in the right center and check the right side of the printer where purging or sponges to link the reservoir are located.
  • Then take out the object that seems like fluff and dirt with isopropyl alcohol and check the sides of the printer that has been moved or changed due to vibration.
  • After that get some compressed air from any computer store and use it to remove any tint that affects the printer.
  • And then purge the printer if one of them was left.
  • Also, look for any bites in the belt that is leading to cartridge jam.
  • At last grease the carrier that has printhead.

4. Clear card size paper jam

Load the card size paper properly because if they are not loaded properly then it will feed into the printer and will not exit. Card size paper must always be loaded in the ASF.

Big pieces of paper could be easy to take out but taking out the small pieces is quite difficult.  If the credit card size paper is loaded in the landscape orientation in the ASF and not coming out then follow these steps.

  • Turn off the printer and then load the same paper type that is jammed inside the printer.
  • Then turn the printer on and the ASF will automatically provide the jammed paper from the printer.
  • In order to resume printing put the paper in the portrait orientation.

If you loaded 4″ x 6″ of paper inside the landscape orientation in the cassette and did not eject. Then follow these steps:

  • Turn the printer off and open the rear cover and then fold it into four a piece of letter-sized plain paper.
  • And then push the folded paper in until it hits the jammed paper.
  • If the jammed paper is visible then pull the folded paper out and close the rear cover and if the jammed paper is not visible then push in the folded paper so that the jammed paper will con in between the feed rollers.
  • Turn the printer on and make sure that the alarm light is off and the jammed paper automatically ejects.
  • And to resume printing load the paper in portrait orientation.

Sum Up

Certainly, the above given step will help you to resolve the Canon printer error code 6a00. Now you will be able to use your Canon printer without any interruption and hurdles.

If the printer is still displaying the Canon printer error 6a00 on the screen then try to get in touch with Canon Printer experts they will provide you full guidance to resolve this Canon printer error 6a00 or you might need to take your printer to the workshop for repair.