Ultimate Guide To Fix Canon Printer Error 5011

BySmith Victor  Last updated on
Canon Printer Error 5011

When packaging material is stuck in the Canon printer then it might show Canon Printer Error 5011. Now, you can take a sigh as you are familiar with the main reason behind the trouble you are going through with.

You will be happy to know that after following the solutions that are shared in this article, you will surely get out of Canon printer error code 5011.

Reason behind Canon Printer Error 5011

Except for the main issue i.e. jammed material, there are some very typical issues that are also being responsible for Canon printer error 5011.

You can look below for the bulleted points to know some troubles that are troubling:

  • Internet perplexities may cause problems.
  • The old version of Canon creates the issue.
  • Internal defaults are also responsible.
  • Improper setup causes problems.
  • The size of sheets may lead to difficulty.
  • Uncleanliness is also a reason.

Quick Tips To Fix Canon Printer Error 5011 | Useful Guide

Remember: Before sharing solutions with you we would like to inform you to not skip any solutions that are recommended to you. Skipping steps will lead to completely unsatisfactory consequences.

1. Take Out The Jammed Material

Yes, you can take out the jammed material from the printer even without the help of a machinist. All you need to do is to adhere to the guidelines…

Step 1st: Shutdown The Printer

At the foremost, you simply have to turn the printer off. But before turning the printer off you have to make sure to proceed with some actions.

  • Disconnect the Internet-connected with your printer.
  • Cancel all the commands that are given to your printer.
  • Remove all the sheets from the printer tray.

After taking all these actions you can freely turn off the printer. When the printer goes off, kindly remove the wire also.

Step 2nd: Look For Stucked Material

Now, it’s time to open the lid of the printer carefully. Then look inside the printer for jammed paper or foreign material. If you find any then very politely take it out from the printer. If you will do it forcefully then it may cause harm to the internal parts.

NOTE: Ensure the printer should not be placed in the dark. It would be tough for you to find jammed material. YOU CAN ALSO PREFER A TORCH FOR BETTER VISUALITY.

2. Clean The Printer

There are only a few people approximately 0.05% who clean their printer externally as well as internally too. Internal cleaning is also very important, if you haven’t done this before then kindly do it now.

You can use tools to clean the printer. The tools are easily available online. You can check them out there.

Other Option:

  • Take warm water and a soft piece of cotton cloth.
  • Dip the cloth in the water and squeeze it tightly.
  • Then clean the printer each part properly.
  • Make sure to not harm any part, do it very politely.
  • After cleaning the printer leave it for 5 to 10 minutes or till it won’t get dry accurately.

3. Connect To A Strong Internet

A very common problem that leads to Canon printer error 5011 problem is the lack of an Internet connection. You have to make sure that the network you have connected with the printer should be strong, stable, and reliable.

If your canon printer won’t connect to WiFi then check out the website Printer Offline Error.

If you will follow a few steps then you will get proper access to the Internet. To know them just have a look below:

Step 1st: Improve The Stability of The Internet

If you don’t know then we would like to clear you that the objects that come across your printer and the router create instability problems. All you have to do is to just remove all the obstacles.

If in case you can’t remove the objects then replace your devices, this will surely be useful to you.

Step 2nd: Improve Lack of The Internet Issue

Connecting many devices with a single router may lead to lower strength of the Internet. Simply, disconnect all the other devices connected with the similar router that is connected with your printer. This is a very effective step to improve Internet strength.

Step 3rd: Check The LAN Wire

If you are having access to the Internet with the help of the LAN wire then there are some common things that you have to note down. Just have a look below:

  • The wire should not be destroyed from anywhere.
  • It should be tightly connected with both ends.
  • The wire should not be folded, if it is then kindly set it properly.

4. Update The Printer

If updating does not take place then the device automatically starts causing troubles. It will be shocking to know but it’s true that if you will not update your device for a long period of time then your device will even be destroyed.

Update your device from time to time for the proper maintenance, smoothing operation and long duration.

5. Give A Reboot

If you are still troubled with the Canon printer error 5011 issue then simply reboot your printer. This is the best method to overcome this difficulty.

There are many users who get free from Canon printer error code 5011 trouble after giving a reboot to your device.

At the End

We are expecting that the solutions shared to fix Canon printer error 5011 will definitely be effective for you. Now, you are free to get full access to the printer.

If you have any other solutions, then share your solution in the comment section, we love to add in the list.

BONUS TIP FOR YOU
Before inserting sheets in the printer tray must note that the size of the sheets should be equal and they should not be folded and twisted.

If the sheets will not be settled properly then there are chances of getting them trapped inside the printer and this will directly lead to Canon printer error 5011.